Bitumen-polymer coatings - Waterproofing, Corrosion control
SealRoof B-200 / Daclar
The Liquid Rubber SealRoof product line has been designed to be environmentally friendly and provide excellent waterproofing for roof structures. The unique properties of the coatings make them effective, easy to apply and cost efficient.
Once applied, the SealRoof coatings form a seamless membrane with excellent adhesion that completely seals the roof substrate to prevent water penetration. As with most Liquid Rubber products, they can withstand freeze/thaw cycles that permit efficient and cost effective shipping during winter months while the season can be extended using Liquid Rubber's Sub-Zero additive that allows SealRoof products to be applied at -10C
The exceptional adhesion and elasticity properties of the SealRoof bitumen based products magnify the water resistance and flexibility of the membrane to deliver an ideal roof restoration solution. These products can be used on almost any roof substrate for both flat and sloped roofs.
MetalSafe products consist of either elastomeric modified bitumen or acrylic emulsions that are combined with polymers that marry traditional waterproofing materials with modern polymer technology to enhance these waterproofing and protection properties.
The resulting MetalSafe products deliver following features:
SealRoof products are cold applied as a liquid at ambient temperatures ranging from -5C to +35C and cure to form a fully adhered, seamless and flexible membrane. All SealRoof products can be applied to the surface using a sprayer, brush or roller that will result in a 1 mm to 3 mm dried coating, depending on the application. SealRoof B-200 can be applied to produce an "instant-set" membrane that is ideal for building thickness in one application on any surface.
Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.
- Seamless waterproof membrane
- Withstands ponding water
- Superb adhesion to most substrates
- UV protection and Solar Reflectivity
- No solvents, VOCs and non-toxic
Once applied, the SealRoof coatings form a seamless membrane with excellent adhesion that completely seals the roof substrate to prevent water penetration. As with most Liquid Rubber products, they can withstand freeze/thaw cycles that permit efficient and cost effective shipping during winter months while the season can be extended using Liquid Rubber's Sub-Zero additive that allows SealRoof products to be applied at -10C
The exceptional adhesion and elasticity properties of the SealRoof bitumen based products magnify the water resistance and flexibility of the membrane to deliver an ideal roof restoration solution. These products can be used on almost any roof substrate for both flat and sloped roofs.
MetalSafe products consist of either elastomeric modified bitumen or acrylic emulsions that are combined with polymers that marry traditional waterproofing materials with modern polymer technology to enhance these waterproofing and protection properties.
The resulting MetalSafe products deliver following features:
- Long term UV resistance
- Seamless and a resilient membrane
- Low permeation, water and air (exceptional waterproofing)
- Salt, acid and chemical resistivity
- Excellent adhesion
- Excellent elongation and recovery, flexibility and the ability to bridge cracks
- No VOC's, non-flammable, low odor
SealRoof products are cold applied as a liquid at ambient temperatures ranging from -5C to +35C and cure to form a fully adhered, seamless and flexible membrane. All SealRoof products can be applied to the surface using a sprayer, brush or roller that will result in a 1 mm to 3 mm dried coating, depending on the application. SealRoof B-200 can be applied to produce an "instant-set" membrane that is ideal for building thickness in one application on any surface.
Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.
- No open flame or hot liquid to apply
- No toxic and flammable solvents
- No seams to seal or adhesives to apply
CreteSafe B-250 / Drylar
The Liquid Rubber CreteSafe product line has been designed to provide superior protection for concrete surfaces. Once applied, the CreteSafe coatings form a flexible membrane that protects the surface with the following properties:
All CreteSafe coatings cure to form a seamless membrane with excellent adhesion that completely seals the concrete to prevent water and chemicals from reaching the surface. Patent-pending enhancements allow CreteSafe® products to be applied at -10C that will extend the season to permit year-round application.
CreteSafe B-250
The tough, highly elastic waterproofing properties of the CreteSafe bitumen based products provide puncture resistance, flexibility and strength that bridges cracks while maintaining their structural integrity under physical and thermal stress.
CreteSafe products consist of either elastomeric modified bitumen or acrylic emulsions that are combined with polymers that marry traditional waterproofing materials with modern polymer technology to enhance these waterproofing and protection properties.
The resulting CreteSafe products deliver the following features:
CreteSafe products are cold applied as a liquid at ambient or sub-zero temperatures and cure to form a fully adhered seamless and flexible membrane.
All CreteSafe products can be applied to the surface using a sprayer, brush or roller that will result in a 1 mm to 2 mm dried coating, depending on the application. CreteSafe B-150 and B-250 can be applied to produce an "instant-set" membrane that is ideal for building thickness for waterproofing vertical surfaces.
Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.
- Prevents water damage and water infiltration
- Protects from chemical, acid and salt attack
- Resists hydrostatic pressure
- Guards against abrasion & erosion
All CreteSafe coatings cure to form a seamless membrane with excellent adhesion that completely seals the concrete to prevent water and chemicals from reaching the surface. Patent-pending enhancements allow CreteSafe® products to be applied at -10C that will extend the season to permit year-round application.
CreteSafe B-250
The tough, highly elastic waterproofing properties of the CreteSafe bitumen based products provide puncture resistance, flexibility and strength that bridges cracks while maintaining their structural integrity under physical and thermal stress.
CreteSafe products consist of either elastomeric modified bitumen or acrylic emulsions that are combined with polymers that marry traditional waterproofing materials with modern polymer technology to enhance these waterproofing and protection properties.
The resulting CreteSafe products deliver the following features:
- Long term UV resistance
- Seamless and a resilient membrane
- Low permeation, water and air (exceptional waterproofing)
- Salt, acid and chemical resistivity
- Excellent adhesion
- Excellent elongation and recovery, flexibility and the ability to bridge cracks
- No VOC's, non-flammable, low odor
CreteSafe products are cold applied as a liquid at ambient or sub-zero temperatures and cure to form a fully adhered seamless and flexible membrane.
All CreteSafe products can be applied to the surface using a sprayer, brush or roller that will result in a 1 mm to 2 mm dried coating, depending on the application. CreteSafe B-150 and B-250 can be applied to produce an "instant-set" membrane that is ideal for building thickness for waterproofing vertical surfaces.
Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.
- No open flame or hot liquid to apply
- No toxic and flammable solvents
- No seams to seal or adhesives to apply
MetalSafe B-300 / Vezlar
Liquid Rubber MetalSafe products are used around the world in the harshest environments to protect metal surfaces from rust, corrosion and water damage. MetalSafe products excel against the elements and maintain their integrity to ensure the highest performance for:
Once applied, the environmentally safe MetalSafe coatings form a seamless membrane with outstanding adhesion that completely seals the metal substrate to prevent corrosion and chemical attack.
MetalSafe B-300
The highly elastic properties of Metal¬Safe B-300 provide puncture resistance, flexibility and low permeability in an instant set membrane. MetalSafe B-300 can be applied over lightly rusted metal surfaces, unlike other corrosion liners that need to be applied to "white" metal, to deliver excellent corrosion protection with no blistering or creep so rust cannot undercut the coating.
Compared to many corrosion liners, MetalSafe B-300 offers:
How Does MetalSafe Work?
Applied as an 'instant-set' coating MetalSafe products mechanically adheres to the metal surface filling even the smallest surface imperfections to completely seal and lock out water and air from the metal surface preventing rust and corrosion from forming.
The combination of bitumen and elastomeric polymers in MetalSafe products provide superior adhesion and elasticity that prevent creep and undercutting when the liner is damaged and maintaining edge integrity when curing.
The resulting MetalSafe products have the following additional features:
MetalSafe products are cold applied as a liquid at ambient or sub-zero temperatures and cure to form a fully adhered, seamless and flexible membrane.
All MetalSafe products can be applied to the surface using a sprayer, brush or roller that will result in a 40 mil to 80 mil-dried coating, depending on the application. MetalSafe B-300 can be applied to produce an "instant-set" membrane that is ideal for building thickness on both horizontal and vertical surfaces.
Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.
- Corrosion Protection
- Chemical & Abrasion Resistance
- Waterproofing
Once applied, the environmentally safe MetalSafe coatings form a seamless membrane with outstanding adhesion that completely seals the metal substrate to prevent corrosion and chemical attack.
MetalSafe B-300
The highly elastic properties of Metal¬Safe B-300 provide puncture resistance, flexibility and low permeability in an instant set membrane. MetalSafe B-300 can be applied over lightly rusted metal surfaces, unlike other corrosion liners that need to be applied to "white" metal, to deliver excellent corrosion protection with no blistering or creep so rust cannot undercut the coating.
Compared to many corrosion liners, MetalSafe B-300 offers:
- No fire or explosion hazards when applying
- Less pre-application preparation
- Easy to apply and easy to repair if damaged
- Metal roofing, doors and framing
- Marine vessel, cargo holds, superstructures, decking
- Bag house and air scrubber equipment
- Mine process tanks and I-beams
- Chemical and fertilizer storage and process tanks
How Does MetalSafe Work?
Applied as an 'instant-set' coating MetalSafe products mechanically adheres to the metal surface filling even the smallest surface imperfections to completely seal and lock out water and air from the metal surface preventing rust and corrosion from forming.
The combination of bitumen and elastomeric polymers in MetalSafe products provide superior adhesion and elasticity that prevent creep and undercutting when the liner is damaged and maintaining edge integrity when curing.
The resulting MetalSafe products have the following additional features:
- Excellent salt water resistance
- Low permeation, water and air (exceptional waterproofing)
- Chemically resistant
- Elasticity, flexibility, to resist cracking
- Spray applied for ease of application
MetalSafe products are cold applied as a liquid at ambient or sub-zero temperatures and cure to form a fully adhered, seamless and flexible membrane.
All MetalSafe products can be applied to the surface using a sprayer, brush or roller that will result in a 40 mil to 80 mil-dried coating, depending on the application. MetalSafe B-300 can be applied to produce an "instant-set" membrane that is ideal for building thickness on both horizontal and vertical surfaces.
Unlike other conventional waterproofing or protective coatings, the application benefits reduce labor costs and increase worker safety.
- No open flame or hot liquid to apply
- No toxic and flammable solvents
- No seams to seal or adhesives to apply
HighBuild S-200 / Zavlar
The excellent waterproofing properties, adhesion and elasticity of Liquid Rubber HighBuild S-200 waterproof sealant is an ideal choice for both the professional contractor and the do-it-yourself customer. Professional contractors have relied on HighBuild products to give them a durable sealant that adheres to all types of surfaces they encounter in both new construction and restoration projects.
HighBuild S-200 offers a sticky, slow flowing single component waterproof coating with high elasticity and full waterproofing properties.
In agricultural applications, HighBuild S-200 is a versatile sealant on the farm and is used to provide waterproofing and corrosion protection for barns, feeding stations, water troughs and silos.
Professional contractors use HighBuild S-200 when building homes, factories, warehouses, and garages to seal penetrations in concrete and masonry, wood, and metal. HighBuild S-200 permanently seals gaps preventing water or vapour leakage. The elastic nature of the product means that it will move with the building and not crack or pull loose from the surface it is adhered to, giving a permanent waterproof seal.
Professional roofers use HighBuild S-200 to provide a water-tight seal around roof penetrations, skylights, breather pipes, flashings and parapet walls. The excellent adhesion, and wide range of materials it will adhere to makes HighBuild S-200 a very versatile and dependable product for roofers.
HighBuild S-200 offers a sticky, slow flowing single component waterproof coating with high elasticity and full waterproofing properties.
In agricultural applications, HighBuild S-200 is a versatile sealant on the farm and is used to provide waterproofing and corrosion protection for barns, feeding stations, water troughs and silos.
Professional contractors use HighBuild S-200 when building homes, factories, warehouses, and garages to seal penetrations in concrete and masonry, wood, and metal. HighBuild S-200 permanently seals gaps preventing water or vapour leakage. The elastic nature of the product means that it will move with the building and not crack or pull loose from the surface it is adhered to, giving a permanent waterproof seal.
Professional roofers use HighBuild S-200 to provide a water-tight seal around roof penetrations, skylights, breather pipes, flashings and parapet walls. The excellent adhesion, and wide range of materials it will adhere to makes HighBuild S-200 a very versatile and dependable product for roofers.
TrowelGrade B-400 / Voxlar
Liquid Rubber TrowelGrade B-400 is a modified elastomeric bitumen emulsion specifically formulated as a trowel grade product where a watertight seal is required. It is suitable for use with building fixtures, pipes, walls and roofs.
As a cold applied, high viscosity product, TrowelGrade B-400 may be applied by trowel or putty knife. The technology employed in TrowelGrade B-400 provides a solvent free, environmentally friendly coating that yields a membrane with excellent strength, elasticity and adhesion that sets in 48-72 hours.
As a cold applied, high viscosity product, TrowelGrade B-400 may be applied by trowel or putty knife. The technology employed in TrowelGrade B-400 provides a solvent free, environmentally friendly coating that yields a membrane with excellent strength, elasticity and adhesion that sets in 48-72 hours.
